Published at Thursday, February 21st, 2019 - 10:41:59 AM. Wall Units. By Odila Auffret.
Consider Purchasing An Entertainment Wall Unit - You Are Not In College Any Longer : Now, before you jump online or run to your nearest furniture shop you should take a few things into consideration. After all this is a pretty big purchase and not something that you will want to take lightly. An entertainment wall unit should not only be physically appealing, it needs to be structurally sound as well. The last thing that you want is to have that nice TV come crashing down because of shoddy workmanship. If you have a lot of heavy things you plan on placing in your new entertainment wall system, then you probably want to steer clear of any flimsy material like particle board being held up by a few nails or screws. If you have such things as a big screen TV or stereo receiver complete with a surround sound speaker system, then take a look at the material that the unit you are considering buying is made out of. Go through the product to see how it is constructed and how it is rated quality wise. Is it real wood or is it cheap particle board? What materials are being used to hold all of the pieces together?
Essential Points to Successfully Fit Wall Units on Different Types of Walls : One very important thing to look out for when fixing the wall unit plates to the wall is to look below to see if there are any sockets below or nearby. If there are I suggest you find the cables in the wall to be sure you miss them. One way to do this is to carefully chisel the wall away, about 150mm below the bracket position so that is far enough away to not affect the strength of the fixing but close enough to accurately mark the wire position as it passes underneath the bracket position. The hanging bracket plate that fixes to the wall usually has 3 slotted holes. Usually the bracket position can be adjusted to be able to use two of the three slots. When drilling the holes angle the drill away from the wire for extra security. Sometimes, as there is only a limited space at the back of a wall unit, you can only trim away a maximum of 10mm so if the wall is running out of plumb by more than that, the wall unit will need to come off the wall to level it. It is sometimes possible to trim the maximum off the unit and then take away some plaster on the wall to make it right. If there is a problem getting the wall unit right the back may need to be moved further into the unit which will involve taken the unit apart if it is a flat pack unit or if it is a rigid unit then the back will need to be cut out and a new back cut to fit the inside size of the unit. Sometimes if the layout allows, it may be a better option to move the base units slightly to enable everything to line up. At times like this it is down to what the customer wants and the various options can be explained as well as any additional costs which may have a bearing on the final outcome.
Any content, trademark’s, or other material that might be found on the D2sportsnetwork website that is not D2sportsnetwork’s property remains the copyright of its respective owner/s. In no way does D2sportsnetwork claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.